Removing The Bottom Cover - Christie Cinema 4K-RGB CP4315-RGB Service Manual

2. Remove the side-intake cover.
3. If required, replace the side-intake cover.
4. To install the side-intake cover, repeat these steps in reverse order, noting the orientation of
the cover.
Ensure that you position the large, unvented portion of the cover adjacent to the back of the
projector.

Removing the bottom cover

The bottom cover provides access to the laser optical subsystem (LOS) and color sensor.
1. Loosen the six captive screws securing the bottom cover.
2. Lower the cover from the projector and slide it out.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright 2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Projector covers and feet
43