8. Remove the lens mount from the projector head and carefully set it aside.
9. To replace the lens mount, repeat these steps in reverse order.
The new lens mount includes three post screws that set the required distance of the lens mount
from the projector head. To avoid damaging the lens mount, do not adjust the post screws.
Cinema 4K-RGB Service Guide–CP4315-RGB, CP4320-RGB, CP4325-RGB, CP4330-RGB
020-102713-03 Rev. 1 (11-2019)
Copyright
2019 Christie Digital Systems USA, Inc. All rights reserved.
©
Lens mount components
36