Connection To Pabx, Obtaining A; Public Line - Toshiba TF 601 User Manual

Installation
Connection to PABX,
obtaining a public line
The TF 461 can be connected not only to
the public switched telephone network
(public line) but also to a PABX. In this
case, additional parameters have to be
entered.
With PABXs, the public line is obtained in
various ways:
• Number Dial one digit (or several
digits) in order to obtain
the public line
•Earth key Earth potential is
connected to the voice
wire(s) in order to obtain
the public line
• Flash key With this method of
obtaining the public line,
the connection circuit is
interrupted briefly.
When the method of obtaining a
public line has been entered,
you must always press the key
"R" before the actual number when you
dial your fax partner. This is also
applicable for saving the fax numbers
(see page 39).
If you have problems if your
machine is connected to an
extension, please read the
"Comments concerning connection to
PABXs" under "Further settings"
12
GB
Installation
2 x
(page 52).
Standby mode
Start the menu
Confirm with START (2x)
Make your selection
Enter function number
Confirm with START
Set public line
Page through the menu...
Public line Flash: Flash function
Public line Earth key: Earth key function
Public line Digit: Code (see next
...until you reach the desired menu item
Confirm with START
Press STOP, return to standby
mode
TOSHIBA
page)
TF 601