Cleaning The Paper Path For Ink Smears; Cleaning The Translucent Film - Epson WF-M4119 Series User Manual

Maintaining the Printer
3. Select one of the alignment menus.
❏ Vertical lines look misaligned or the printouts look blurry : Select Ruled Line Alignment.
❏ Horizontal banding occurs at regular intervals: Select Horizontal Alignment.
4. Follow the on-screen instructions.

Cleaning the Paper Path for Ink Smears

When the printouts are smeared or scuffed, clean the roller inside.
Important:
c
Do not use tissue paper to clean the inside of the printer. The print head nozzles may be clogged with lint.
1. Select Maintenance on the printer's control panel.
To select an item, use the
2. Select Paper Guide Cleaning.
3. Follow the on-screen instructions to load paper and clean the paper path.
4. Repeat this procedure until the paper is not smeared with ink.

Cleaning the Translucent Film

When the printout is not improved after aligning the print head or cleaning the paper path, the translucent film
inside the printer may be smeared.
Items required:
❏ Cotton swabs (several)
❏ Water with a few drops of detergent (2 to 3 drops of detergent in 1/4 cup of tap water)
❏ Light for checking smears
Important:
c
Do not use cleaning liquid other than water with a few drops of detergent.
1. Turn off the printer by pressing the
>
Improving Print Quality
u d l r
buttons, and then press the OK button.
P
button.
>
Cleaning the Translucent Film
72