Setup Menu - Epson SureColor SC-F6300 Series User Manual

SC-F6300 Series User's Guide
Item
Nozzle Check
Head Cleaning
All Nozzles
Selected Nozzles
Cutter Maintenance
Adjust Cut Position
Replace Cutter
Head Maintenance
Head Cap Cleaning
Waste Ink Counter

Setup menu

* indicates default settings.
Item
Printer Setup
Using the Control Panel Menu
Parameter Explanation
Press the Z button to print a nozzle check pattern. Inspect the
pattern visually and perform head cleaning if you detect faint or
missing colors.
"Clearing clogged nozzles" on page 81
U
Execute (Light) Note the numbers of patterns that contain faint or missing colors
and clean all or selected nozzles. Perform cleaning using All Nozzles
Execute
if there are faint or missing areas in all of the lines. Perform cleaning
(Medium)
using Selected Nozzles if there are faint or missing areas in specific
lines. You can select multiple lines in Selected Nozzles.
Execute (Heavy)
"Clearing clogged nozzles" on page 81
U
Execute (Light)
Execute
(Medium)
Execute (Heavy)
*
The cut position can be adjusted in increments of 0.1 mm.
-3 to 3 mm (0 )
Moves the cutter to the replacement position so it can be replaced.
Press the Z button to move the cutter to the replacement position.
The paper must be removed before the cutter can be replaced.
Remove the paper before proceeding.
"Replacing the Cutter" on page 87
U
Yes Cleans the print head. You need the Head Maintenance Kit to
execute this option. See the following for more details.
No
"Print Head Maintenance" on page 85
U
When you press the Z button, the print head moves to the cleaning
position and the caps can be cleaned. See the following for more
information on cleaning.
"Cleaning Caps" on page 67
U
If you replace the Waste Ink Bottle before being prompted by a
message indicating the replacement interval of the Waste Ink Bottle
in the control panel, run the Waste Ink Counter option after
replacement.
Parameter Explanation
54