YASKAWA FSDrive-MV1000 Instructions Manual page 39

2. Attach the wire ropes for lifting to the support hooks on the transformer to lift the transformer panel.
Figure 2.4
Transformer
support hooks
3. Ensure that the hanging angle is no greater than 60°.
DANGER! Do not remove bolts from the top of the transformer panel and fit hoisting tackle to lift it. Failure to comply could result in
deformation or falling of the transformer panel.
DANGER! When lifting the transformer panel, take care to ensure that the housing is not damaged by contact with the ceiling plate
or other parts. Failure to comply could result in deformation of the transformer panel or damage to the ceiling plate.
1. Attach the wire ropes for lifting to the support hooks on the top of the panel to lift the drive.
Figure 2.5
Top view
2. Ensure that the hanging angle is no greater than 60
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
Transportation Procedure
Wire ropes for lifting
Front view
Figure 2.4 Lifting the Transformer Panel
Table 2.6 Transportation Procedure 1 (Class: 4 kV)
Transportation Procedure
Wire ropes for lifting
Drive
Figure 2.5 Inserting Wire Ropes for Lifting
.
°
2.2 Mechanical Installation
Hanging angle of 60° max.
Hanging angle of 60° max.
Front view
2
39