5.1 Section Safety
NOTICE
Observe proper electrostatic discharge procedures (ESD) when handling the drive.
Failure to comply could result in ESD damage to the drive circuitry.
Never disconnect the motor from the drive while the drive is outputting voltage.
Failure to comply could result in damage to the drive.
Use only shielded cable to wire analog input/output signals for the control circuit.
Failure to comply could result in drive malfunction.
Use shielded twisted-pair wires and ground the shield to the ground terminal of the drive.
Do not modify the drive circuitry.
Failure to comply could result in damage to the drive and will void warranty.
Do not attempt to modify or alter the drive.
Yaskawa is not responsible for any modification of the drive made by the user.
Check all the wiring after installing the drive and connecting other devices to ensure that all connections are correct.
Failure to comply could result in damage to the drive.
5
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
109