Wiring Check; Wiring Check; Checks - YASKAWA FSDrive-MV1000 Instructions Manual

3.9

Wiring Check

◆ Checks

After wiring work, check that all wiring has been completed. Do not perform a buzzer check on control circuits. Confirm
the following items.
• All wiring is correct.
• No foreign matter such as wire chips or unnecessary screws remain.
• There are no loose screws. (If there are, tighten them.)
• No wire ends have contact with terminals other than the ones they are connected to.
• The terminal numbers and cable lead names match up.
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions

3.9 Wiring Check

3
75