YASKAWA FSDrive-MV1000 Instructions Manual page 149

Digital Operator Display
ndAT
Cause
The drive the parameters were copied from
and the drive you are attempting to write to
have different electrical specifications, a
different capacity, is set to a different control
mode, or is a different model number.
The drive or USB Copy Unit being used to
write the parameters is blank and does not
have any parameters saved on it.
Digital Operator Display
rdEr
Cause
Failed while attempting to read parameter
settings from the drive.
Digital Operator Display
rEAd
Cause
Displayed while the parameter settings are
being read onto the USB Copy Unit.
Digital Operator Display
vAEr
Cause
The drive the parameters were copied from
and the drive you are performing the Verify
mode on have different electrical
specifications or are a different capacity.
Digital Operator Display
vFyE
Cause
Indicates that parameter settings that have
been Read and loaded onto the Copy Unit or
digital operator are different.
Digital Operator Display
vrFy
Cause
The Verify mode has confirmed that
parameters settings on the drive and
parameters read to the copy device are
identical.
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions
Model, Voltage Class, Capacity Mismatch
⇒Make sure model numbers and specifications are the same for both drives.
⇒Make sure all connections are correct, and copy the parameter settings onto the USB
Copy Unit or the digital operator.
Error Reading Data
⇒Press and hold the READ key on the USB Copy Unit for at least one second to have the
unit read parameters from the drive.
Reading Parameter Settings (flashing)
Not an error.
Voltage Class, Capacity Mismatch
⇒Make sure electrical specifications and capacities are the same for both drives.
Parameter settings in the drive and those saved to the copy function are not the same
⇒To have the same parameter settings for both devices, either copy the parameter settings
on the USB Copy Unit or the digital operator and save them in the drive. Or, copy the
parameter settings on the drive and save them in the USB Copy Unit or the digital operator.
Comparing Parameter Settings (flashing)
Not an error.
5.9 Copy Function Related Displays
Error Name
Possible Solution
Error Name
Possible Solution
Error Name
Possible Solution
Error Name
Possible Solution
Error Name
Possible Solution
Error Name
Possible Solution
5
149