YASKAWA FSDrive-MV1000 Instructions Manual page 40

2.2 Mechanical Installation
1. Insert wire ropes for lifting through the support hook installation openings on the top of the drive.
Note: Drives are shipped with the support hook installation openings fitted.
Figure 2.6
2. Attach the wire ropes for lifting to the support hooks on the transformer to lift the transformer panel.
Figure 2.7
Transformer
support hooks
3. Ensure that the hanging angle is no greater than 60°.
DANGER! Do not remove bolts from the top of the transformer panel and fit hoisting tackle to lift it. Failure to comply could result in
deformation or falling of the transformer panel.
DANGER! When lifting the transformer panel, take care to ensure that the housing is not damaged by contact with the ceiling plate
or other parts. Failure to comply could result in deformation of the transformer panel or damage to the ceiling plate.
40
Table 2.7 Transportation Procedure 2 (Class: 4 kV)
Transportation Procedure
Support hook
installation opening
Top view
Figure 2.6 Inserting Wire Ropes for Lifting
Wire ropes for lifting
Front view
Figure 2.7 Lifting the Transformer Panel
Wire ropes for lifting
Drive
Front view
Hanging angle of 60° max.
YASKAWA ELECTRIC EZZ010928 FSDrive-MV1000 Instructions