Table of Contents
Advertisement
M3SR Series 4100
2 Getting Started
2.1 Unpacking, Checking, Packing, Transport and Storage
2.1.1 Unpacking and Checking
After delivery carry out the following steps:
1. Check the packaging for damage.
2. Unpack the delivered goods.
3. Check the delivered goods (including accessories) against the delivery note.
4. Check the delivered goods for signs of transport damage.
5. Contact the shipping agent immediately, if damage is found.
6. Keep the packaging (box etc.) for later use, e.g. if the radio is to be sent to
7. Rohde & Schwarz for service. You can find the current address of your representa-
tive on our homepage www.rohde-schwarz.com. Navigate to Service & Support / Service
Locations.
2.1.2 Packing
Prior to any transport carry out the following steps:
1. Use the original package (box etc.) and packaging material, if possible, to prevent me-
chanical and electrical damage. Make sure that the stability of the packaging is adequate
to the contents.
2. Put the unit in the plastic bag (protection against moisture and dust).
3. Put the unit in the package by using the packaging material. Avoid direct lateral contact
between unit and packaging.
4. Seal the package.
5. Affix a HANDLE WITH CARE label on the package.
6. Remove the old address and shipment labels from the package and affix the new ones.
Operating Manual 6175.4760.02 – 01
Getting Started
2.1
Advertisement
Table of Contents
