Table of Contents
Advertisement
M3SR Series 4100
4.3.5.8
Initiating a Link via MMI
Softkey
Operating Manual 6175.4760.02 – 01
Selection / Editor
Activate
Initiating a Link via MMI
Description
1. Press 'Call !' softkey to initiate a link setup.
The call will be initiated with the selected link
mode (see
sect. 4.3.5.5 Selecting the Link Mode).
If 'Call!' softkey is pressed, a link setup to the
selected destination address(es) will be initiat-
ed.
A link setup can be initiated instead by
user data (for link modes with internal mo-
dems) or by one of the PTT inputs (for
voice link modes or external modems).
4.23
Advertisement
Table of Contents
