Table of Contents
Advertisement
M3SR Series 4100
A radio can service several control units, but only one control unit can have opera-
tional access rights at a time, the other control units can have only monitoring rights
(for details about radio access rights see sect. 3.3 Control and Monitoring of Radio
and Control Unit).
1.9.2 Several Radios and Control Units in a Network
Several radios and control units may be connected to a local area network (LAN, see
Figure 1.8). Each radio and each control unit is identified by a unique IP address. The control
units can reach the radios in the network using the unique radio IP addresses. Due to this
fact any radio connected to the LAN can be operated and monitored by any control unit con-
nected to the same LAN. Precondition is that all the components in the LAN, in particular ra-
dios and control units, are configured accordingly in advance (see sect. 2.8 Basic
Configuration of the Radio and sect. 2.9 Basic Configuration of the Control Unit).
1.20
Operating Manual 6175.4760.02 – 01
Radio Control
Advertisement
Table of Contents
