Table of Contents
Advertisement
M3SR Series 4100
Softkey
4.206
Selection / Editor
Example for entering the user keyset with the
new COMSEC key 1234ABCDEF and
TRANSEC key 12345679A0B
Start from User Keyset folder. Select desired
user keyset to be edited.
Press 'Edit' to change to COMSEC/TRANSEC
editor.
The COMSEC key editor will open.
Enter new COMSEC key.
Editing a User Keyset
Description
1. Press softkey 'Edit' to open keyset editor.
2. Enter desired COMSEC key.
3. Press 'ENT' to confirm.
4. Enter desired TRANSEC key .
5. Press 'ENT' to confirm.
6. To complete the insertion press the 'Save'
softkey.
The modification is now complete.
The key must contain between 8 and 32
characters.
For the COMSEC and TRANSEC keys any al-
phanumerical characters are allowed.
•
letters 'A' to 'Z' and 'a' to 'z'
•
numerals '1' to '0'
•
characters, for example: !, ", #, $, %
Operating Manual 6175.4760.02 – 01
Advertisement
Table of Contents
