Table 5.8 State Transitions (Events); Table 5.9 State Transitions (Rebroadcast) - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
Table 5.8 shows the state transitions and the events causing the state transition:

Table 5.8 State Transitions (Events)

No.
1
2
3
4
5
6
7
8
9
10
11
12

Table 5.9 State Transitions (Rebroadcast)

No.
100
101
102
103
104
105
5.48
Old State New State
Idle Connecting
Connecting ConnectedTx
Connecting Idle
Connecting Busy
ConnectedTx Disconnecting
Disconnecting Idle
ConnectedTx Idle
Idle Busy
Busy Idle
Idle ConnectedRx
ConnectedRx Idle
Connecting ConnectedRx
Old State New State
Connecting Rebro-Connecting
Rebro-Connecting Rebro-Busy
Rebro-Connecting ConnectedTx
Rebro-Connecting Idle
Connecting Rebro-Busy
Rebro-Busy Idle
Event
Connection establishment pending.
Connection established.
Connection request failed, e.g. destination not reachable.
Other station won competition for connection (other station
tries to set up a connection to a 2
Connection termination initiated by user.
Connection termination finished.
Idle timeout.
• External connection established.
• External FastLink data transmission detected.
• External connection termination.
• Idle timeout.
Connection established.
• Connection termination (initiated by active Tx station).
• Idle timeout.
Other station won competition for connection (other station
tries to set up a connection to this radio).
Event
Connection establishment over rebroadcast pend-
ing .
A remote network in rebroadcast scenario is busy.
Connection over rebroadcast established.
Connection request failed, e.g. destination not
reachable.
Remote network in rebroadcast scenario is busy.
The Rebro-Busy state indicates that the connection
request failed due to a busy remote network (and not
due to a non-reachable station).
This transition is followed immediately by the next
transition (105).
Remote network in rebroadcast scenario is busy.
Operating Manual 6175.4760.02 – 01
FastLink Mode (FLM)
nd
other station).