M3SR Series 4100
5.3.3.9
Changing the Connection Mode
Softkey
5.80
Type
Listbox
Changing the Connection Mode
Description
1. Press softkey 'ConMode'.
2. Select 'P to P' or 'Net' from listbox.
3. Press 'ENT' to confirm.
The new selection is now effective.
The connection mode setting depends on the
network topology the radio is used in. For sin-
gle point-to-point connections, i.e. when only
two radios form a network, the point-to-point
connection mode (P to P) shall be used for
best performance. Nevertheless, network con-
nection mode (Network) can be used in a net-
work consisting of only 2 radios. Due to a
different access scheme on the air channel, a
degraded performance must be taken into ac-
count compared to P- to-P mode.
In networks consisting of more than 2 radios,
the Network mode must be selected. Proper
functioning in P-to-P mode is highly improba-
ble in such a network.
Operating Manual 6175.4760.02 – 01