R&S M3SR 4100 Series Operating Manual page 120

M3SR Series 4100
The parameters of the radio are set and monitored via remote control interface. The remote
control interface is available as packet interface (TCP/IP port) based on standard Ethernet.
The R&S GB4000C uses this interface. However, any other client may use this interface for
control or monitoring purposes as well. For a detailed description of the remote control inter-
face see remote control interface document.
The remote control interface is also available as serial interface (RS-232-C, see
Figure 3.2).
3.4 Operating Manual 6175.4760.02 – 01
Overview