R&S M3SR 4100 Series Operating Manual page 308

M3SR Series 4100
The following steps are required to load the configuration to the Fill Gun:
1. Connect the R&S GP3000 Fillgun via the R&S GK3021 USB Cable to the PC (USB in-
terface, see Figure 3.78).
2. Switch PC on.
3. Start the R&S RNMS3000 Mission Planner (MPlan) software on the PC. For further in-
formation refer to R&S RNMS3000 documentation.
4. Create a new mission with the R&S R&S RNMS3000.
5. Generate the radio configuration with the R&S R&S RNMS3000.
6. Start the R&S RNMS3000 Remote Device Loader (RDL) software. For further informa-
tion refer to R&S RNMS3000 documentation.
7. In RDL switch to the tab "Fillgun GP3x00". The fillgun is displayed in the list with its ex-
isting radio configuration (if any).
8. Delete all existing configurations using the popup menu item "Delete fillgun".
9. Select the desired configuration in the left window of RDL.
10. Copy the configuration to the fillgun using drag and drop.
11. Exit RDL software.
12. Disconnect USB cable at the PC and fillgun.
3.192
Download from Fillgun into Radio
Operating Manual 6175.4760.02 – 01