Figure 3.79 Second Step: Loading Configuration From Fillgun Into Radio - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
Loading the Configuration from the Fillgun to the Radio

Figure 3.79 Second Step: Loading Configuration from Fillgun into Radio

1 Radio
2 Fillgun Connector
3 Fillgun
The following steps are required to load the configuration from fillgun into the radio:
1. Connect fillgun with fillgun connector on radio front panel (see Figure 3.79).
2. Switch radio on (make sure that the radio is on Preset Page 0).
3. Perform the following actions on a control unit connected to the radio (see
sect. 3.3 Control and Monitoring of Radio and Control Unit) with a session with opera-
tional access rights (see sect. 3.3 Control and Monitoring of Radio and Control Unit).
-
-
Operating Manual 6175.4760.02 – 01
1
3 3
From Home menu navigate to submenu Fill Gun (see sect. 3.3 Control and Monitor-
ing of Radio and Control Unit)
In the Fill Gun menu press softkey RGA. The radio now gets the possible Radio Glo-
bal Addresses (RGAs) from the PC and a listbox with the possible RGAs to be load-
ed is displayed.
Download from Fillgun into Radio
2
ICN-4D-D-231000-R-D0894-00140-A-01-1
3.193