Table of Contents
Advertisement
M3SR Series 4100
4.8.3.12
Selecting a Hopset
By means of softkey 'Hopset' the operator can select a hopset.
Softkey
4.178
Type
Listbox
The currently used hopset is displayed in the
central area.
Selecting a Hopset
Description
1. Press softkey 'Hopset' .
2. Select desired hopset from listbox.
3. Press 'ENT' to confirm.
The new hopset is now effective.
In the hopset frequency ranges are defined for
frequency hopping.
Hopsets have to be configured using the R&S
RNMS3000. User Hopsets (see
sect. 4.8.4.12 Editing a User Hopset) are con-
figured using the MMI
The user hopsets are freely configurable by
the user of the radio (see also
sect. Defining a New Hopset).
Operating Manual 6175.4760.02 – 01
Advertisement
Table of Contents
