Selecting The Search Pattern Time; Table 4.7 Dependency Of Tolerable Deviation On Selected Search Pattern - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
4.8.3.6

Selecting the Search Pattern Time

By means of softkey 'SP' (search pattern) the operator can change the search pattern time.
Softkey

Table 4.7 Dependency of Tolerable Deviation on Selected Search Pattern

Operating Manual 6175.4760.02 – 01
Type
Listbox
Search Pattern
SP1
SP2
SP3
SP6
SP16
SP48
SP192
Selecting the Search Pattern Time
Description
1. Press softkey 'SP'.
2. Select desired search pattern time from
listbox.
3. Press 'ENT' to confirm.
The new setting is now effective.
Possible values:
SP1, SP2, SP3, SP6, SP48, SP192
Search Pattern 1 (SP1) reduces the time re-
quired for link setup so that the user can
start talking sooner or data transmission
can begin sooner. SP1 should be selected
if synchronization within the SECOM-H net
is good, i.e. if the last time acquisition took
place not too long ago.
Late Traffic Entry (LTE) is only supported up to
Search Pattern 3.
The greater the search pattern, i.e. the tolera-
ble deviation, the longer the time required for
link setup.
Net parameter
Tolerable Deviation
37 ms
93 ms
149 ms
318 ms
880 ms
2680 ms
10780 ms
4.171