Sec Voice Operational Menu; Changing The Frequency For Sdv Communication; Changing The Power Level For Sdv Communication - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100

4.7.4 SEC VOICE Operational Menu

Figure 4.34 Menu1611: Sec. Voice OP 1/1
4.7.4.1

Changing the Frequency for SDV Communication

Rx and Tx frequencies can be changed either by using the knob, if the Smart Frequency Ed-
itor (SFE) is enabled, or by means of the softkey 'FREQ'.
These procedures are explained in
sect. 3.5 Control Unit Maintenance and
sect. 3.7.2.15 Changing the Frequency.
4.7.4.2

Changing the Power Level for SDV Communication

By means of softkey 'Power' the operator can change the output power level.
This procedure is described insect. 3.7.2.21 Selecting the Power Level.
4.150
SEC VOICE Operational Menu
ICN-4D-J-231003-R-D0894-00005-A-01-1
Operating Manual 6175.4760.02 – 01