Selecting The Scan Action - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
3.9.4.9

Selecting the Scan Action

Softkey
3.212
Softkey Type
Activate
Activate
Selecting the Scan Action
Description
Command softkey, enabled only when scan-
ning is started.
Press softkey 'SCAN PAUSE'
to pause the scanning cycle.
Press softkey 'SCAN CONT'
to continue the scanning cy-
cle.
Command softkey, enabled only if precondi-
tions are fulfilled.
• One squelch type has to be set on (Fre-
quency Scanning).
• There has to be more than one channel in
the channel list (Channel Scanning).
• PTT-key should not be pressed.
Press softkey 'SCAN START'
to start frequency scan.
Press softkey 'SCAN EXIT' to
stop frequency scan.
Operating Manual 6175.4760.02 – 01