Table of Contents
Advertisement
M3SR Series 4100
4.8.4.7
Selecting the Interleaving Length
By means of softkey 'INTLV' (interleaver) the operator can change the interleaver length.
Softkey
Operating Manual 6175.4760.02 – 01
Type
Listbox
Selecting the Interleaving Length
Description
1. Press softkey 'INTLV'.
2. Select desired interleaver length from list-
box.
3. Press 'ENT' to confirm.
The new selection is now effective.
Possible values:
NO, SHT (short), MDL, (middle) LNG (long)
Through the interleaver function, the data with-
in the data block are rearranged. The extent of
rearrangement is defined by the time factor
short, middle or long. Rearrangement im-
proves the error correction capability.
4.189
Advertisement
Table of Contents
