Changing The Frequency Scanning Parameters - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
3.9.4.6

Changing the Frequency Scanning Parameters

Softkey
Operating Manual 6175.4760.02 – 01
Softkey Type
Editor
Editor
Editor
Changing the Frequency Scanning Parameters
Description
1. Press 'Start (kHz)' softkey.
2. Enter start frequency in kHz.
3. Press 'ENT' key to confirm.
Possible values:
1500.000 kHz to 511975.000 kHz
Default value:
1500 kHz
1. Press 'Step (kHz)' softkey.
2. Enter step width in kHz.
3. Press 'ENT' key to confirm.
Possible values:
0.001 kHz to 510500.000 kHz
Default value:
500 kHz
1. Press 'Stop (kHz)' softkey.
2. Enter stop frequency in kHz.
3. Press 'ENT' key to confirm.
Possible values:
1500.001kHz to 511975.000 kHz
Default value:
29900 kHz
3.209