Preset Page - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
3.3.1.5

Preset Page

Select the Preset Page with the softkey labelled 'Preset' in the Home menu. The number of
the currently selected Preset Page is displayed in the label of the softkey.
To change the Preset Page it is necessary that the control unit is connected to the radio (see
"Connecting to Radio" on p. 3.30) and that the control unit has operational access rights (see
"Session Types and Access Rights" on p. 3.35).
To change the Preset Page:
1. Make sure to be in the Home menu.
2. Press the softkey 'Preset' and a listbox opens with the currently available Preset Pages.
The listbox lists the numbers of the presets and the communication modes of the preset
(see Figure 3.27).
3. Use the knob to select one of the Preset Pages listed.
4. Press 'ENT' to confirm.
Now the 'Preset' softkey gets inactive and the Preset Page changes. This means that the cur-
rent operation of the radio is finished and the radio resumes operation according to the set-
tings of the just selected Preset Page. The settings of a Preset Page include the
communication mode and all the parameters of the communication mode. Changing the cur-
rently active Preset Page implies that a large number of radio parameters need to be recon-
figured, so this will take a moment.
The Preset Page change is finished when the Preset softkey gets active again. Now the radio
is operating according to the newly selected Preset Page settings. The central area of the
Home menu shows the important parameters of the communication mode. Use the naviga-
tion softkeys in the right upper corner to navigate to communication mode domain operation-
al and configuration submenus (see "Communication Mode Menus" on p. 3.42).
3.44
Control and Monitoring of Radio and Control Unit
Operating Manual 6175.4760.02 – 01