M3SR Series 4100
3.7.2.14
Changing the Clarifier Frequency
Softkey
Operating Manual 6175.4760.02 – 01
Softkey Type
Editor
Changing the Clarifier Frequency
Description
1. Press 'CLARIF' softkey.
2. Change to desired value.
3. Press 'ENT' to confirm.
Possible values:
-200 Hz up to +200 Hz
Default value:
0 Hz
The clarifier function is used for fine tuning to
the received signal (receiver incremental tun-
ing, RIT).
This function is particularly important for single
sideband modulation (SSB), where the clarifi-
er can improve the readability of the voice sig-
nal.
3.149