Changing The Frequency - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
3.7.2.15

Changing the Frequency

Rx and Tx frequencies can be changed either by using the knob, if the Smart Frequency Ed-
itor (SFE) is enabled (see softkeys in sect. 3.5 Control Unit Maintenance), or by means of
the softkey FREQ.
Only channels configured as modifiable can have its TX and/or RX frequency modi-
fied. This can be configured via R&S RMNS3000.
3.150
Changing the Frequency
Operating Manual 6175.4760.02 – 01