Changing The Bfo Frequency For A1A - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
3.7.2.23

Changing the BFO Frequency for A1A

Softkey
3.160
Softkey Type
Editor
Changing the BFO Frequency for A1A
Description
1. Press 'BFO' softkey.
2. Change the beat frequency oscillator
(BFO) frequency to the desired value.
Possible values:
–2000 Hz to +2000 Hz
Default value:
800 Hz
If the operator prefers a higher or lower A1A
receiving tone, it can be adjusted by the BFO.
The default value of 800 Hz is suitable for
most cases.
Operating Manual 6175.4760.02 – 01