Changing The Signal Squelch Mode - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
3.7.3.9

Changing the Signal Squelch Mode

Softkey
Operating Manual 6175.4760.02 – 01
Softkey Type
Listbox
Changing the Signal Squelch Mode
Description
1. Press 'SQL Mode' softkey.
2. Select desired value from listbox.
3. Press 'ENT' to confirm.
Possible values:
RX (tone is affecting the receiver only)
TX (tone is affecting the transmitter only)
RXTX (tone is affecting the receiver and
transmitter, recommended for almost all appli-
cations)
Default value:
RXTX
3.179