R&S M3SR 4100 Series Operating Manual page 235

M3SR Series 4100
Softkey
It is not possible to edit the radio IP address list when the control unit is connecting
to a radio or is connected to a radio.
Operating Manual 6175.4760.02 – 01
Description
Press this softkey to insert a new entry in the Radio IP Ad-
dress List above the currently selected entry.
Two steps are necessary to insert a new entry:
1. After pressing this softkey an editor comes up to enter
the logical address of the radio. Enter the logical ad-
dress with the numeric keypad or the knob and press
'ENT' to confirm.
2. After pressing 'ENT' another editor comes up to enter
the IP address. Use the knob or the numeric keypad to
enter each of the four numbers of the address sepa-
rately. To select the next number press the key and
then press 'ENT' to confirm
The total number of entries in the Radio IP Address
List is limited to 100.
Navigate to the menu CU MTC 4/4 (see sect. 3.5.4 Control
Unit MTC 4/4 (4004)).
Control Unit MTC 3/4 (4003)
Possible Values
3.119