Table of Contents
Advertisement
M3SR Series 4100
Softkey
Operating Manual 6175.4760.02 – 01
Description
Navigate to the previous menu (VoIP 1/2, see
sect. 3.4.6 Menu VoIP 1/2 (3061)).
Open an editor to change
the Tx URI which is required
to set the radio into ED137
mode.
Open an editor to change
the Rx URI which is re-
quired to set the radio into
ED137 mode.
Open an editor to change
the lowest port which can be
used by the radio for the
RTP datastream.
Select the size with the
knob or with the numeric
keypad.
Open an editor to change
the highest port which can
be used by the radio for the
RTP datastream.
Select the size with the
knob or with the numeric
keypad.
Open a listbox and use the
knob to select the mode of
the VoIP service.
Press 'ENT' to confirm.
Open an editor to change
the jitter buffer size.
Select the size with the
knob or with the numeric
keypad.
Default: TX
Default: RX
Default: 4000
Default: 65535
Default: ED137+SIP
Default: 60 ms
Menu VoIP 2/2 (3062)
Possible Values
Up to 64 characters
•
a to z
•
A to Z
•
_
Up to 64 characters
•
a to z
•
A to Z
•
_
0 to 65535
0 to 65535
OFF
Disable VoIP service.
ED137+SIP
Accepts both, ED137 and SIP
calls.
ED137B only
Rejects SIP calls which are
not ED137B.
0 to 200 ms in steps of 20 ms
3.81
Advertisement
Table of Contents
