Switching Passive Time Acquisition On Or Off - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
4.4.5.14

Switching Passive Time Acquisition On or Off

Softkey
4.104
Type
Toggle
In the central area the currently active value is
displayed.
Switching Passive Time Acquisition On or Off
Description
1. Press softkey to toggle the passive time
acquisition on/off.
The new value is selected immediately.
Possible values:
• ON
• OFF
If passive time acquisition is switched on, a
station, which is not time server and detects
time synchronization calls over the air be-
tween other stations, uses the information in
this call to update its local time.
If passive time acquisition is switched to
on, the network load can be reduced, espe-
cially if GPS cannot be used as time
source.
Operating Manual 6175.4760.02 – 01