Figure 3.27 Preset Page Selection (Example) - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100

Figure 3.27 Preset Page Selection (Example)

After delivery from factory the radio holds only one Preset Page. This initial Preset
Page 0 is pre-configured with communication mode Fixed Frequency (FF). But the ra-
dio can hold up to 100 Preset Pages (presets). A preset contains a complete set of pa-
rameter settings of a communication mode. All presets are easily prepared with a PC,
using the Radio Network Management System (R&S RNMS3000, for details see R&S
RNMS3000 documentation), and are loaded into the radio via fillgun, from a PC via se-
rial cable or via LAN (see sect. 3 Operation). Preset Page 0 can be edited by the oper-
ator as well. On Preset Page 0 only fixed frequencies (FF) can be set. Any
communication mode may be assigned to the Preset Pages 1 to 99 (see
sect. 4 Operation in Special Communication Modes ). All of these Preset Pages (1 to
99) have to be prepared with a PC, using R&S RNMS3000.
Operating Manual 6175.4760.02 – 01
Control and Monitoring of Radio and Control Unit
ICN-4D-G-231000-R-D0894-00043-A-01-1
3.45