Selecting The Power Level - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
4.3.5.16

Selecting the Power Level

Softkey
4.32
Type
Listbox
Selecting the Power Level
Description
1. Press 'Power' softkey.
2. Select desired power level from listbox.
3. Press ENT to confirm.
Possible output power levels for 150 W sys-
tems:
10 mW - 10 W - 20 W - 50 W - 100 W - 150 W
Possible output power levels for 500 W sys-
tems:
10 mW - 20 W - 50 W - 100 W - 250 W - 500 W
(when ordered with CE mark, limited to 250 W
for f < 4 MHz)
Possible output power levels for 1000 W sys-
tems:
10 mW - 50 W - 100 W - 250 W - 500 W -
1000 W (when ordered with CE mark, limited
to 250 W for f < 4 MHz)
By selecting a higher output power, the signal-
to-noise ratio at the receiver is increased,
which allows the communication coverage to
be extended.
Operating Manual 6175.4760.02 – 01