Changing The Link Timeout - R&S M3SR 4100 Series Operating Manual

M3SR Series 4100
4.3.6.11

Changing the Link Timeout

Softkey
Operating Manual 6175.4760.02 – 01
Type
Editor
In the central area the currently active value is
displayed.
Changing the Link Timeout
Description
1. Press softkey 'Link Timeout'.
2. Change value with the knob.
3. Press 'ENT' to confirm.
Possible values:
0 s to 5000 s
step width of 1 ms
When voice modes are selected: If there is no
transmit activity, a terminate command will be
sent automatically after this timeout is
reached.
When data modes are selected: If there is no
transmit activity and if the modem does not
see any input signal, a terminate command will
be sent automatically after this timeout is
reached.
4.47