Rear Fender B - Honda CBR650F Service Manual

dummyhead dummyhead

REAR FENDER B

REMOVAL/INSTALLATION
Remove the following:
– Fuel tank (page 7-7)
– Battery (page 20-5)
– Rear fender stay (page 2-14)
– Rear cowl (page 2-13)
– Brake/tail light unit (page 21-6)
Release the following:
– Three wire clips [1]
– Fuel pump 3P (Black) connector [2]
– Rear brake light switch 2P (Black) connector [3]
– Rear wheel speed sensor 2P (Gray) connector [4]
(CBR650FA, CB650FA only)
Remove the spring [1].
Release the seat lock cable [2] from the cable guide [3], then disconnect it from the key cylinder [4].
Remove the key cylinder cover [5] and key cylinder.
Release the following from the rear fender B [6]:
– Junction box cover [7]
– Starter relay switch [8]
– DLC [9]
– Fuse boxes [10]
Remove the two bolts [11].
Slide the rear fender B downward and remove it out of the frame.
Installation is in the reverse order of removal.
[1]
[4]
[9]
[5]
[2]
[3]
[8]
[7]
FRAME/BODY PANELS/EXHAUST SYSTEM
[1]
[10]
[2]
[3]
[1]
[4]
[6]
[11]
2-15