Honda CBR650F Service Manual page 229

dummyhead dummyhead
CLUTCH/GEARSHIFT LINKAGE/STARTER CLUTCH
Install the snap ring [1] into the starter clutch outer [2]
groove securely.
Install the starter driven gear [1] into the starter clutch
outer while turning the starter driven gear clockwise.
Apply engine oil to the rotating area of the needle
bearing [1].
Install the needle bearing into the starter clutch outer.
Recheck the one-way clutch operation (page 11-14).
INSTALLATION
Install the thrust washer [1] to the crankshaft.
11-16
[2]
[1]
[1]
[1]
[1]