Honda CBR650F Service Manual page 63

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
DRIVE SPROCKET COVER
REMOVAL/INSTALLATION
Remove the following:
– Pinch bolt [1]
– Gearshift arm [2]
– Two socket bolts [3]
– Drive sprocket cover [4]
Remove the chain guide [5] by releasing the two wire
clips [6].
Installation is in the reverse order of removal.
• Route the wires and hoses into the guide of the
sprocket cover (page 1-20).
• Align the slit in the gearshift arm with the punch
mark on the spindle.
DRIVE CHAIN COVER/MUD GUARD
REMOVAL/INSTALLATION
Remove the following:
– Three socket bolts [1]
– Bolt [2] and hose clamp [3]
– Drive chain cover/mud guard [4]
Installation is in the reverse order of removal.
2-16
[1]
Align
[2]
[5]
[4]
[3]
[6]
[2]
[3]
[1]
[4]