Honda CBR650F Service Manual page 372

dummyhead dummyhead
HEADLIGHT
BULB REMOVAL/INSTALLATION
Avoid touching the halogen bulb. Finger prints can
create hot spots that cause a bulb to break.
CBR650F/FA
Disconnect the headlight 3P (Black) connector [1] and
remove the dust cover [2].
Unhook the bulb retainer [3] and remove the headlight
bulb [4].
Installation is in the reverse order of removal.
• Align the bulb tab with the groove properly.
• Install the dust cover with its arrow mark [5] facing
up.
CB650F/FA
Remove the two bolts [1].
Remove the headlight assembly [2] by releasing it from
the holes [3] of the bottom bridge and support it
securely, being careful not to damage the front sub wire
harness.
LIGHTS/METERS/SWITCHES
[3]
[1]
[2]
[4]
[5]
[2]
[1]
[3]
21-3