Honda CBR650F Service Manual page 61

dummyhead dummyhead
FRAME/BODY PANELS/EXHAUST SYSTEM
U MODEL
Remove four tapping screws [1] and rear fender cover
[2].
Remove two tapping screws [3] and rear fender A [4].
Installation is in the reverse order of removal.
REAR FENDER STAY
REMOVAL/INSTALLATION
Remove the seat (page 2-12).
Disconnect the following connectors [1]:
– Rear turn signal light 2P (left: Orange, right: Light
blue)
– License light 2P (White)
Remove the three socket bolts [2] and rear fender stay
[3] by pulling the wires out from the holes [4] of the rear
fender B.
Installation is in the reverse order of removal.
TORQUE:
Rear fender stay mounting bolt:
12 N·m (1.2 kgf·m, 9 lbf·ft)
2-14
[1]
[2]
[4]
[3]
[4]
[3]
[2]
[1]