Honda CBR650F Service Manual page 304

dummyhead dummyhead
BEARING REPLACEMENT
Remove the upper outer race using the special tools.
Always replace the
bearing and races
TOOLS:
as a set.
Ball race remover set
– [1] Remover attachment
– [2] Remover shaft
Remove the lower outer race using the special tool and
a suitable shaft.
TOOL:
[1] Bearing remover
Install the stem nut [1] onto the steering stem [2] to
prevent the threads from being damaged when
removing the lower inner race [3].
Remove the lower inner race with a chisel or equivalent
tool, being careful not to damage the stem.
Remove the lower dust seal [4].
Install a new lower dust seal [1] onto the steering stem.
Press a new lower inner race [2] using the special tool.
TOOL:
[3] Steering stem driver
FRONT WHEEL/SUSPENSION/STEERING
07953-MJ10000
07953-MJ10100
07953-MJ10200
07946-3710500
[1]
07946-MB00000
[2]
[4] [3]
[3]
[1]
[1]
[2]
[1]
[2]
16-27