Honda CBR650F Service Manual page 305

dummyhead dummyhead
FRONT WHEEL/SUSPENSION/STEERING
Drive in a new upper outer race [1] into the steering
head pipe using the special tool.
TOOLS:
[2] Driver
[3] Attachment, 42 x 47 mm
Drive in a new lower outer race.
TOOLS:
Driver
Attachment, 52 x 55 mm
INSTALLATION
CBR650F/FA shown:
LOWER OUTER RACE
LOWER STEERING BEARING
LOWER INNER RACE
LOWER DUST SEAL
STEERING STEM
• Use urea based multi-purpose extreme pressure
grease NLGI #2 (EXCELITE EP2 manufactured by
KYODO
manufactured by Shell or equivalent) for the bearing
race sliding surface and dust seals.
Apply grease to the lip of the lower dust seal [1].
Apply 3 – 5 g (0.1 – 0.2 oz) (per each bearing) of grease
to the bearing race sliding surfaces.
Install the bearings [2] in the lower inner race and upper
outer race.
Install the steering stem [3] and upper inner race [4].
16-28
07749-0010000
07746-0010300
07749-0010000
07746-0010400
UPPER DUST SEAL
YUSHI CO., LTD., STAMINA
ADJUSTMENT NUT
EP2
[1]
[2]
[2]
[3]
[1]
LOCK NUT
LOCK WASHER
UPPER INNER RACE
UPPER STEERING
BEARING
UPPER OUTER RACE
[3]
[4]
[2]