Honda CBR650F Service Manual page 204

dummyhead dummyhead
Remove the bolts [1] and water hose joint A [2] from the
cylinder head.
Remove the O-ring [3] from the water hose joint A.
Remove the 6 mm bolts [1].
Loosen the 9 mm washer-bolts [2] in a crisscross
pattern in 2 or 3 steps, then remove them.
Remove the cylinder head [3].
• Attach a piece of wire to the cam chain to prevent it
from falling into the crankcase.
• Do not tap the cylinder head too hard and do not
damage the mating surface with a screwdriver.
Remove the dowel pins [1] and gasket [2].
Remove the starter clutch (page 11-13).
Remove the cam chain guide A [1].
Remove the washer bolt [2], collar [3] and cam chain
tensioner [4].
Remove the cam chain [5] and timing sprocket [6] from
the crankshaft.
CYLINDER HEAD/VALVES
[3]
[1]
[1]
[1]
[2]/[3]
[4]
[5]/[6]
[2]
[2]
[3]
[2]
[1]
10-11