Front Fender; Rearview Mirror - Honda CBR650F Service Manual

dummyhead dummyhead

FRONT FENDER

REMOVAL/INSTALLATION
Remove the following:
– Brake hose clamp bolts [1]
– Brake pipe joint mounting bolt [2]
– Two collars [3] (Except RU, U model)
– Two reflex reflectors [4] (RU, U model)
– Four socket bolts [5]
– Front fender [6]
– Four collars [7]
Installation is in the reverse order of removal.
WINDSCREEN (CBR650F/FA)
REMOVAL/INSTALLATION
Remove the following:
– Four socket bolts [1]
– Four plastic washers [2]
– Windscreen [3]
– Four well nuts [4]
Installation is in the reverse order of removal.
TORQUE:
Windscreen socket bolt:
1.5 N·m (0.2 kgf·m, 1.1 lbf·ft)

REARVIEW MIRROR

REMOVAL/INSTALLATION
CBR650F/FA
Remove the two socket bolts [1] and rearview mirror [2].
Installation is in the reverse order of removal.
• Install with the reference mark [3] facing the rear
side.
TORQUE:
Rearview mirror mounting socket bolt:
10 N·m (1.0 kgf·m, 7 lbf·ft)
FRAME/BODY PANELS/EXHAUST SYSTEM
[2]
[4] (RU, U model)
[4] (RU, U model)
[1]
[1]
[2]
[3]
[4]
CBR650F/FA:
[3]
[3] (Except RU, U model
[5]
[6]
[7]
[2]
[1]
2-5