Table of Contents
Advertisement
14.3 CUMMINS QSM11 (IMPORT)
It is suitable for CM570 engine control module. Engine type is QSM11 G1, QSM11 G2.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
CAN GND
CAN(H)
CAN(L)
Engine type: Cummins ISB
14.4 CUMMINS QSX15-CM570
It is suitable for CM570 engine control module. Engine type is QSX15.
Terminals of controller
Fuel relay output
Start relay output
Terminals of controller
CAN GND
CAN(H)
CAN(L)
Engine type: Cummins QSX15-CM570
HGM7110DC Genset Controller
C1 connector
5&8
-
3 pins data link connector
C
A
B
50 pins connector
38
-
9 pins connector
SAE J1939 shield-E
SAE J1939 signal-C
SAE J1939 return-D
Version: 1.0
HGM7110DC Genset Controller
Remark
Outside expand relay, when fuel
output, making port 5 and port 8 of
C1 be connected
Connect to starter coil directly
Remark
CAN
communication
line(connect with ECU terminal
only)
Impedance 120Ω connecting line is
recommended.
Impedance 120Ω connecting line is
recommended.
Remark
Oil spout switch
Connect to starter coil directly
Remark
CAN
communication
line(connect with ECU
only)
Impedance 120Ω connecting line is
recommended.
Impedance 120Ω connecting line is
recommended.
2014-09-27
shielding
shielding
terminal
Page 61 of 68
Advertisement
Table of Contents
