Cummins Qsm11 (Import); Cummins Qsx15-Cm570 - Smartgen HGM6100LT Series User Manual

13.3 CUMMINS QSM11 (IMPORT)

It is suitable for CM570 engine control module. Engine type is QSM11 G1, QSM11 G2.
Terminals of controller
Programmable output 1
Starting relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Cummins ISB.

13.4 CUMMINS QSX15-CM570

It is suitable for CM570 engine control module. Engine type is QSX15.
Terminals of controller
Programmable output 1
Starting relay output
Terminals of controller
CAN_SCR
CAN(H)
CAN(L)
Engine type: Cummins QSX15-CM570.
HGM6100LT Series Genset Controller User Manual
Table 17 – C1 Connector
C1 connector
5&8
-
Table 18 – 3 Pins Data Link Connector
3 pins data link connector
C
A
B
Table 19 – 50 Pins Connector
50 pins connector
38
-
Table 20 – 9 Pins Connector
9 pins connector
SAE J1939 shield-E
SAE J1939 signal-C
SAE J1939 return-D
Remark
Set programmable output 1 as "Fuel
Output". Outside expand relay, when fuel
output, making make port 5 and port 8 of
C1 be connected.
Connect to starter coil directly.
Remark
CAN communication
(connect to ECU terminal only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
Remark
Oil spout switch;
Set programmable output 1 as "Fuel
Output".
Connect to starter coil directly
Remark
CAN communication
(connect to ECU terminal only).
Using impedance 120Ω connecting line.
Using impedance 120Ω connecting line.
shielding line
shielding line
Page 42 of 50