Cycle Support In Program Editor (Sw 4.3 And Higher); Overview Of Important Files - Siemens SINUMERIK 840D Programming Manual

1
General

1.4 Cycle support in program editor (SW 4.3 and higher)

1.4.1 Overview of important files

The following files form the basis for cycle support:
Assignment
Cycle selection
Input screen form for parameter
setting
Input screen form for parameter
setting
Help displays
For MMC 100/MMC 100.2 the help displays must be
converted into another format (*.pcx) and linked to
produce a loadable file (cst.arj).
1-28
File Application
cov.com Standard and user
cycles
sc.com Standard cycles
uc.com User cycles
*.bmp Standard or user
cycles
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
1
12.97
09.01
File type
Text file
Text file
Text file
Bitmap
© Siemens AG, 2002. All rights reserved