Create Example Program In Editor - Siemens SINUMERIK 802D Training Manual

Section 5

Create example program in editor

Notes
5.1 Create example program in editor
Create a new program, but first a directory must be created.
The name for this directory will be PLATE1
Curser over new directory name.
Or with
A new program has to be generated in order to insert the code.
The program should be given the name PLATE1.
After generating a new program in the editor, the blocks for the surface
milling, contour milling and the slot milling have to be typed in.
C77
C77
SINUMERIK 802D sl Operating and Service Training Manual Page 5