Siemens SINUMERIK 840D Programming Manual page 256

3
Milling Cycles
3.16 Swiveling – CYCLE800 (SW 6.2 and higher)
Structure of E_TCARR.spf (F_TCARR.spf)
Name of tool
Swivel input data
old SDR ≠
new SDR?
3-256
The following structure relates to the swivel data record change and the
associated tool change under ShopMill/ShopTurn.
SDR --> swivel data record
yes
old SDR
no
== swivel
head?
no
Automatically
change old/new
SDR?
no
Manually
change old/new
SDR?
no
Change old
SDR automatically,
new SDR
manually?
no
Change old
SDR manually,
new SDR auto-
matically?
no
Tool
change?
no
End of cycle
TOOLCARR.spf
yes
Mark: _M2: change magazine tool
_M3: change manual tool
yes
Mark: _M8: replace swivel head/table
automatically
yes
Mark: _M9: replace swivel head/table
manually
Mark: _M6: unload swivel head/table
yes
automatically
Mark: _M5: load swivel head/table
manually
Mark: _M7: unload swivel head/table
yes
manually
Mark: _M8: load swivel head/table
automatically
yes
Mark: _M2: change magazine tool
_M3: change manual tool
SINUMERIK 840D/840Di/810D Programming Guide Cycles (PGZ) – 11.02 Edition
3
12.97
11.02
© Siemens AG, 2002. All rights reserved